Hoppa till innehållet

Pioneer PRS-D1200SPL

PIONEERCAR

1200W RMS i 1ohm. Klass-D

Trusted for maximum, stable and reliable power

Designed to match our first-class SPL subwoofers, our SPL Champion Edition amps continuously break world records, pushing beyond the 180dB barrier.

IRRP Power Supply
They manage to do this by incorporating the very best in audio technology, to give you rock-solid, reliable power.

The D1200 delivers 1 x 2400W at 1&!, 1 x 2000W at 2&! and 1 x 1000W at 4&!.

The D1200 includes an Independent Rail Regulating Power (IRRP) supply. This power supply structure regulates the positive and negative rail voltages separately, whereas most amplifiers regulate the positive rail alone.

The negative rail could destabilise during a crucial SPL moment, resulting in overall loss of performance; the IRRP boosts strength, so you can rely on the power when you need it most.

DAP Circuitry
The D1200 also includes a protective circuitry (DAP: Dynamic Amplifier Protection) that adapts to the output signal level. As a result, the protection level matches the operating condition of the moment. Again, DAP gives you extra reliability, even at higher output.

Highly efficient Class-D technology is part of the amplifier construction, as well. That means less current for less heat, with no distortion, so that your sound always stays pure, crisp and clear.

  • Maximum Output Power 1 x 2400W (1O), 1 x 2000W (2O), 1 x 1000W (4O)

  • Continuous power output (RMS)
    • 1 x 1200W (50Hz/1O = 2%THD)
    • 1 x 1000W (50Hz/2O = 1%THD)
    • 1 x 500W (20Hz - 240Hz/4O = 1%THD)

  • Load impedance capability 1 - 8O

  • Frequency response 10 - 240 Hz

  • Distortion < 0.3 %

  • S/N ratio > 80 dB

  • Bass Boost 40 - 120Hz
    0, 6, 9, 12 dB via remote control

  • LPF 40 - 240Hz (-24 db/Oct)

  • Subsonic Filter 20Hz (-24 db/Oct)

  • MOSFET output section (+) Yes

  • Sync Control Yes

  • RCA terminals Yes (input/output)

  • Speaker Terminals Block-type

  • High Voltage Input Capability (+) 200 mV - 6.5 V V

  • Input level control 400 mV - 6.5 V

  • High performance balanced isolator circuit Yes

  • Max. current consumption (A/4O) 44A

  • Chassis size (W x H x D) 381 x 65 x 282 mm

  • Unit weight 6 kg

Leveranstid ca 7-14 dagar
10990:-
Betala från 354,36:- kronor per månad
Art nr: 938853

Produktinformation


Trusted for maximum, stable and reliable power

Designed to match our first-class SPL subwoofers, our SPL Champion Edition amps continuously break world records, pushing beyond the 180dB barrier.

IRRP Power Supply
They manage to do this by incorporating the very best in audio technology, to give you rock-solid, reliable power.

The D1200 delivers 1 x 2400W at 1&!, 1 x 2000W at 2&! and 1 x 1000W at 4&!.

The D1200 includes an Independent Rail Regulating Power (IRRP) supply. This power supply structure regulates the positive and negative rail voltages separately, whereas most amplifiers regulate the positive rail alone.

The negative rail could destabilise during a crucial SPL moment, resulting in overall loss of performance; the IRRP boosts strength, so you can rely on the power when you need it most.

DAP Circuitry
The D1200 also includes a protective circuitry (DAP: Dynamic Amplifier Protection) that adapts to the output signal level. As a result, the protection level matches the operating condition of the moment. Again, DAP gives you extra reliability, even at higher output.

Highly efficient Class-D technology is part of the amplifier construction, as well. That means less current for less heat, with no distortion, so that your sound always stays pure, crisp and clear.

  • Maximum Output Power 1 x 2400W (1O), 1 x 2000W (2O), 1 x 1000W (4O)

  • Continuous power output (RMS)
    • 1 x 1200W (50Hz/1O = 2%THD)
    • 1 x 1000W (50Hz/2O = 1%THD)
    • 1 x 500W (20Hz - 240Hz/4O = 1%THD)

  • Load impedance capability 1 - 8O

  • Frequency response 10 - 240 Hz

  • Distortion < 0.3 %

  • S/N ratio > 80 dB

  • Bass Boost 40 - 120Hz
    0, 6, 9, 12 dB via remote control

  • LPF 40 - 240Hz (-24 db/Oct)

  • Subsonic Filter 20Hz (-24 db/Oct)

  • MOSFET output section (+) Yes

  • Sync Control Yes

  • RCA terminals Yes (input/output)

  • Speaker Terminals Block-type

  • High Voltage Input Capability (+) 200 mV - 6.5 V V

  • Input level control 400 mV - 6.5 V

  • High performance balanced isolator circuit Yes

  • Max. current consumption (A/4O) 44A

  • Chassis size (W x H x D) 381 x 65 x 282 mm

  • Unit weight 6 kg

logotypes-se.png
 
Produkten har lagts i kundvagnen