Hoppa till innehållet

Visaton TIW-250 XS

VISATON

HighEnd Subbas - 200W, 8ohm, 89dB

10" high-end woofer. The extra-wide elastic surround, the long voice coil and particularly large magnet arrangement give this speaker extremely long excursion. Thanks to the multiple venting of the voice coil (pole piece hole, holes in the pole piece plate, cutouts in the aluminium diecast basket to vent the spider from behind) losses and flow noise are minimised. The capton voice coil carrier and the long voice coil enable the driver to withstand considerable loads. The diaphragm is a sandwich construction made up of layers of fibreglass and polyester fabric which makes it particularly and low in resonance.
These design features result in high level-accuracy and excellent low-range bass imaging.

 

Recommended cabinets:

Volume/Principle BR-Channel fb fc/QTC
30 l/closed  -  - 57 Hz/0,59
50 l/closed  -  - 48 Hz/0,5
70 l/closed  -  - 44 Hz/0,46
30 l/bass reflex 69x150mm (3" aeroport 930292) 42 Hz  -
50 l/bass reflex 69x140mm (3" aeroport 930292) 36 Hz  -
70 l/bass reflex 69x110mm (3" aeroport 930292) 32 Hz  -

 

Technical Data:
Rated power 200 W
Maximum power 300 W
Nominal impedance Z 8 Ohm
Frequency response fu- 3000 Hz
(fu: Lower cut-off frequency depending on cabinet) .
Mean sound pressure level 89 dB (1 W/1 m)
Excursion limit +/-14 mm
Resonance frequency fs 33 Hz
Magnetic induction 1,3 T
Magnetic flux 1600 µWb
Height of front pole-plate 8 mm
Voice coil diameter 50 mm
Height of winding 25 mm
Cutout diameter 235 mm
Net weight 5,3 kg
D.C. resistance Rdc 5,6 Ohm
Mechanical Q factor Qms 5,21
Electrical Q factor Qes 0,35
Total Q factor Qts 0,33
Equivalent volume Vas 66 l
Effective piston area Sd 314 cm²
Dynamically moved mass Mms 49 g
Force factor Bxl 13 Tm
Inductance of the voice coil L 1,7 mH


 

I lager. Leveranstid 1-2 dagar
Kan hämtas i lagershop
1995:-
Betala från 92,01:- kronor per månad
Art nr: 937229

Produktinformation


10" high-end woofer. The extra-wide elastic surround, the long voice coil and particularly large magnet arrangement give this speaker extremely long excursion. Thanks to the multiple venting of the voice coil (pole piece hole, holes in the pole piece plate, cutouts in the aluminium diecast basket to vent the spider from behind) losses and flow noise are minimised. The capton voice coil carrier and the long voice coil enable the driver to withstand considerable loads. The diaphragm is a sandwich construction made up of layers of fibreglass and polyester fabric which makes it particularly and low in resonance.
These design features result in high level-accuracy and excellent low-range bass imaging.

 

Recommended cabinets:

Volume/Principle BR-Channel fb fc/QTC
30 l/closed  -  - 57 Hz/0,59
50 l/closed  -  - 48 Hz/0,5
70 l/closed  -  - 44 Hz/0,46
30 l/bass reflex 69x150mm (3" aeroport 930292) 42 Hz  -
50 l/bass reflex 69x140mm (3" aeroport 930292) 36 Hz  -
70 l/bass reflex 69x110mm (3" aeroport 930292) 32 Hz  -

 

Technical Data:
Rated power 200 W
Maximum power 300 W
Nominal impedance Z 8 Ohm
Frequency response fu- 3000 Hz
(fu: Lower cut-off frequency depending on cabinet) .
Mean sound pressure level 89 dB (1 W/1 m)
Excursion limit +/-14 mm
Resonance frequency fs 33 Hz
Magnetic induction 1,3 T
Magnetic flux 1600 µWb
Height of front pole-plate 8 mm
Voice coil diameter 50 mm
Height of winding 25 mm
Cutout diameter 235 mm
Net weight 5,3 kg
D.C. resistance Rdc 5,6 Ohm
Mechanical Q factor Qms 5,21
Electrical Q factor Qes 0,35
Total Q factor Qts 0,33
Equivalent volume Vas 66 l
Effective piston area Sd 314 cm²
Dynamically moved mass Mms 49 g
Force factor Bxl 13 Tm
Inductance of the voice coil L 1,7 mH


 

Relaterade produkter

logotypes-se.png
 
Produkten har lagts i kundvagnen