Hoppa till innehållet

Omnitronic SMA-1000

OMNITRONIC

Stereo PA amplifier with integrated limiter and SMPS 2 x 500 W/4 ohms

Low weight and height due to integrated switch-mode power supply
Temperature-controlled fan, particularly quiet during operation
Limiter and speaker switch-on delay
Switchable bass-boost at 80 Hz with 6 dB level increase
3 operating modes can be selected (stereo, parallel or bridged)
Selectable input sensitivity
2 level controls
3 LEDs for each channel for activated protective circuit (protect) overload (clip) and signal
2 LEDs for parallel and bridge operation
Complete protection set against short-circuit, overheat, DC voltage and VHF signals
Electronically balanced inputs via XLR mounting jacks, with feed-through output (stereo RCA/6.3 mm jack)
Speaker outputs via lockable Speaker plugs
Class AB circuitry
Robust steel chassis
Rack installation with 2 units

Power supply: 230 V AC, 50 Hz ~
Power consumption: 598 W (1/8 power)
Power output sine:
stereo 4 ohms 2 x 482 W
stereo 8 ohms 2 x 340 W
8 ohms bridged 1 x 1000 W
Frequency range: 20-20000 Hz, ± 0.5 dB
Damping factor: >150
Distortion factor: 0.05 %
Slew rate: >20 V/µsec
S/N ratio: >90 dB
Channel seperation: >70 dB/ 1 kHz
Input sensitivity: 26 dB/32 dB (2.48 V/1.244 V), switchable
Voltage gain: 38 dB
Input impedance: 20 kohms (balanced), 10 kohms (unbalanced)
Input connectors: stereo XLR
Output connectors:stereo Speaker, feed-through output (stereo RCA, stereo 6.3 mm jack)
Circuitry: class AB
Control elements: power switch, level control per channel, mode switch (stereo/parallel/bridged), sensitivity selector, peak filter selector
LED indicators: parallel, bridge (globally), protect, clip, signal (per channel)
Protection circuits: short-circuit, overheat, DC voltage, VHF signals, softstart
Construction: steel chassis
Dimensions (DxWxH): 390 x 483 x 92 mm (19", 2 U)
Weight: 7 kg
Shipping weight: 9.65 kg

I lager. Leveranstid 1-2 dagar
Kan hämtas i lagershop
3995:-
2999:-
Betala från 96,70:- kronor per månad
Art nr: 941500

Produktinformation


Low weight and height due to integrated switch-mode power supply
Temperature-controlled fan, particularly quiet during operation
Limiter and speaker switch-on delay
Switchable bass-boost at 80 Hz with 6 dB level increase
3 operating modes can be selected (stereo, parallel or bridged)
Selectable input sensitivity
2 level controls
3 LEDs for each channel for activated protective circuit (protect) overload (clip) and signal
2 LEDs for parallel and bridge operation
Complete protection set against short-circuit, overheat, DC voltage and VHF signals
Electronically balanced inputs via XLR mounting jacks, with feed-through output (stereo RCA/6.3 mm jack)
Speaker outputs via lockable Speaker plugs
Class AB circuitry
Robust steel chassis
Rack installation with 2 units

Power supply: 230 V AC, 50 Hz ~
Power consumption: 598 W (1/8 power)
Power output sine:
stereo 4 ohms 2 x 482 W
stereo 8 ohms 2 x 340 W
8 ohms bridged 1 x 1000 W
Frequency range: 20-20000 Hz, ± 0.5 dB
Damping factor: >150
Distortion factor: 0.05 %
Slew rate: >20 V/µsec
S/N ratio: >90 dB
Channel seperation: >70 dB/ 1 kHz
Input sensitivity: 26 dB/32 dB (2.48 V/1.244 V), switchable
Voltage gain: 38 dB
Input impedance: 20 kohms (balanced), 10 kohms (unbalanced)
Input connectors: stereo XLR
Output connectors:stereo Speaker, feed-through output (stereo RCA, stereo 6.3 mm jack)
Circuitry: class AB
Control elements: power switch, level control per channel, mode switch (stereo/parallel/bridged), sensitivity selector, peak filter selector
LED indicators: parallel, bridge (globally), protect, clip, signal (per channel)
Protection circuits: short-circuit, overheat, DC voltage, VHF signals, softstart
Construction: steel chassis
Dimensions (DxWxH): 390 x 483 x 92 mm (19", 2 U)
Weight: 7 kg
Shipping weight: 9.65 kg

logotypes-se.png
 
Produkten har lagts i kundvagnen